Big Capacity Fiber Optic Splice Closure Up to 144 Cores 2 in 2 out

Big Capacity Fiber Optic Splice Closure Up to 144 Cores 2 in 2 out

Item Number : MBN-FOSC-A15

The Fiber Optic Splice Closure is suitable for protecting fiber cable splices in straight-through and branching applications. Fiber Optic Splice Closure is used for the protective connection between two or more optical cables. Fiber Optic Splice Closure is suitable for single core fiber optic cable and ribbon fiber optic cable.

MBN-FOSC-A15 Big Capacity Fiber Optic Splice Closure Up to 144 Cores 2 in 2 out

 

Fiber Optic Splice Closure Description

 Innovative design is an erect and horizontal type with one hinge on one side and opens on another side. It is the most reliable FOSC in the world. The Fiber Optic Splice Closure is suitable for protecting fiber cable splices in straight-through and branching applications. Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic ABS or PC by numerical control equipment; therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation. The strong housing and main components provide fire resistant, waterproof, and quakeproof while protecting splices during pulling, compressing, and impacting, bending, tensioning, axial tensioning.
Fiber Optic Splice Closure ensures long-term reliability and usage under ambient temperature from -40℃ to +75℃

 

 

Fiber Optic Splice Closure Features

Components: Seal tape, Insulation tape, Nylon tie, heat-shrinkable sleeve, metal hook, seal fittings, internal hexagonal spanner,
Atmospheric pressure: 70∽106KPa 
Optic property: The spare fiber coiled in the fiber emplacing device; the fiber connector won’t attenuate during the FOSC installation operation period.
Seal Performance: After the closures are sealed, then pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure.
Re-encapsulation Performance: The closures are pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure after three times of repeat encapsulation  
Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.
Insulation resistance: ≥2X104MΩ
Span-life: 30 years.

 

Fiber Optic Splice Closure Uses and properties

Fiber Optic Splice Closure is belonged to open structure airproof tie-in system of machine pressure.
Fiber Optic Splice Closure is used for the protective connection between two or more optical cables
Suitable for single core fiber optic cable and ribbon fiber optic cable

 

Fiber Optic Splice Closure Main Technical Indexes

1.Airproof performance: Airing pressure inside box 100Kpa, pointer immovability after 24 hours or no air bell within 15min when parked in the common temperature water.                    
2. Re-encapsulation performance: no change in the index of air-proof performance after three times of repeat encapsulation 

 

Fiber Optic Splice Closure Application

Fiber Optic Splice Closure is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by the network.

Fiber Optic Splice Closure Specification

Name Big Capacity Fiber Optic Splice Closure Up to 144 Cores
Model MBN-FOSC-A15
Maximum capacity 144cores
Cables Entry & Exit 2Entry 2Exit
Dimension (CM) 48X20X12CM
Material PP
Cable Diameter (mm) Φ7-Φ20
Sealing Structure Sticky Cincture Or Silicon Gum Material Sealing

 

Fiber Optic Splice Closure Parts in Details










 

Related Products