Bwinners Splice sleeves are useful when creating fiberglass joint when doing fiber optic fusion work. Usually, after melting, fibers splice sleeves are applied to the melting point. This application serves as a way of providing further protection to the joint. It makes the joint point stronger and reduces the chances of signal loss as a result of damage to the point.
RoHS and Reach Compliant
Clear (transparent) outer Tube
Polished stainless steel rod
Excellent reinforcement of fusion splicing portion
Reliable protection under any environmental conditions
Fits into most splice holders
Stocked for immediate delivery
Custom products available
Model | O.D. after Shrinking (mm) | Length (mm) | Fusion Tube(D) | Stainless Steel Rod (D) | Package (Pcs/bag) | ||
I.D.(mm) | Length (mm) |
O.D. (mm) |
Length(mm) | ||||
Larger Fiber Splice Sleeve | |||||||
BW-OFS-61 | 3.0±0.1 | 61 | 1.5 | 61 | 1.5 | 56 | 100 |
BW-OFS-60 | 3.0±0.1 | 60 | 1.5 | 60 | 1.5 | 56 | 100 |
BW-OFS-60B | 2.8±0.1 | 60 | 1.3 | 60 | 1.5 | 56 | 100 |
BW-OFS -45 | 3.0±0.1 | 45 | 1.5 | 45 | 1.5 | 41 | 100 |
BW-OFS -40 | 3.0±0.1 | 40 | 1.5 | 40 | 1.5 | 36 | 100 |
BW-OFS -23 | 3.0±0.1 | 23 | 1.5 | 23 | 1.5 | 18 | 100 |
Standard Fiber Splice Sleeve | |||||||
BW-OFS -60M | 2.6±0.1 | 60 | 1.3 | 60 | 1.2 | 56 | 100 |
BW-OFS -45M | 2.6±0.1 | 45 | 1.3 | 45 | 1.2 | 41 | 100 |
BW-OFS -40M | 2.6±0.1 | 40 | 1.3 | 40 | 1.2 | 36 | 100 |
BW-OFS -30M | 2.6±0.1 | 30 | 1.3 | 30 | 1.2 | 26 | 100 |
BW-OFS -25M | 2.6±0.1 | 25 | 1.3 | 23 | 1.2 | 21 | 100 |
Small Fiber Splice Sleeve | |||||||
BW-OFS -40T-S | 1.5±0.1 | 40 | 0.5 | 40 | 0.7 | 40 | 100 |
BW-OFS -40T | 1.9±0.1 | 40 | 1.2 | 40 | 0.7 | 40 | 100 |
BW-OFS -60T | 2.0±0.1 | 60 | 0.5 | 60 | 1 | 56 | 100 |
BW-OFS -40T | 2.0±0.1 | 40 | 0.5 | 40 | 1 | 36 | 100 |
BW-OFS -60A | 2.5±0.1 | 60 | 1.3 | 60 | 1 | 56 | 100 |
BW-OFS -40A | 2.5±0.1 | 40 | 1.3 | 40 | 1 | 36 | 100 |
Fiber Patch Cables
Fiber Patchcord
fiber pigtail
Fiber Optic Patchcord
fiber optical patch cord
Cable Patch Cord
Fiber Patch Cord
Fiber Optic Adaptor
Fiber Optic Adapter
Bwinners Splice sleeves are useful when creating fiberglass joint when doing fiber optic fusion work. Usually, after melting, fibers splice sleeves are applied to the melting point. This application serves as a way of providing further protection to the joint. It makes the joint point stronger and reduces the chances of signal loss as a result of damage to the point.
Splice sleeves have a unique design, and their construction also helps in providing maximum protection. For instance, they have dust and waterproof feature. So, when you use splice sleeves, you reduce the likelihood of having signal or data transmission issues caused by contamination. In most cases, such contamination occurs at splice points.
You will find different designs of splice sleeves though they all serve the same purpose. The difference in a design affects performance and application. You should get Bwinners splice sleeves that is a perfect fit for your fibers. Variations normally come in terms of length and other aspects of design.
Bwinners standard splice sleeve should have a typical length of 40mm or 60mm. Fiber optic sleeve should also have stainless steel as part of its structure, specifically as a strength member. Also, to help you get a clear view of the splice point, splice sleeves often have a clear color. The out layer of splice sleeves should also be a high-quality shrink material.
Depending on where you acquire them, splice sleeves can come as a package with a couple of pieces inside it. You, of course, will require a couple of sleeves for your project and not just one. You will most likely find that a bag or package can have 100 pieces of splice sleeves.
For ease of use and great performance, you need to get your splice sleeves from reputable manufacturers (Bwinners). The most important thing also is to understand how they work and ways of reducing chances of failure.
With the best splice sleeves from Bwinners, you won’t worry about performance.